Abstract
Ion implantation is a cornerstone technology in modern semiconductor device fabrication, enabling precise control of doping profiles essential for device performance. However, achieving target specifications requires comprehensive metrology to monitor implantation parameters, verify dopant activation, and detect process-induced defects. This chapter presents an overview of key characterization techniques for ion implantation process control, organized into three complementary categories: microanalytical methods (SIMS, TEM, APT), optical methods (photoluminescence, photomodulated reflectance), and electrical methods (four-point probe, spreading resistance profiling, capacitance-voltage). Each technique is examined in terms of its fundamental principles, instrumentation, sample requirements, measurement capabilities, and practical limitations. Microanalytical techniques provide compositional and structural information with nanometer-scale resolution, optical methods enable rapid, non-destructive assessment at different stages of the process flow – photomodulated reflectance on as-implanted samples and photoluminescence imaging following annealing – both detecting of implantation-induced damage and dopant activation, while electrical techniques directly measure parameters relevant to device operation. The chapter emphasizes the complementary nature of these approaches, highlighting that comprehensive process control requires judicious selection and combination of multiple techniques. Application examples throughout the chapter demonstrate the practical utility of each method for characterizing shallow junctions, complex doping profiles, extended defects, and advanced device structures including wide bandgap semiconductors and three-dimensional architectures.
作者
Mathias Rommel, Nikolay Cherkashin, Volker Häublein, Robert Hillard, Peter Horvath, Wilfried Lerch, Chiao Yu Liu, Paula Peres, Katherine P. Rice, Tamás Sipőcz, Dénes Zoltán Ullrich